1. Enter/Exit Configuration Mode
2. Recall Defaults
= Enable RS232 (+)
= Enable CR Suffix (+)
= Enable LF Suffix (-) => 3
= Space Parity (-) => 4
= 9600 BAUD Rate (+)
= 7 Data Bits (-) => 5
= Disable RTS/CTS Handshaking (-) => 6
= Character RTS/CTS (-) => 7
3. Disable LF Suffix
4. No Parity
5. 8 Data Bits
6. Enable RTS/CTS Handshaking
7. Message RTS/CTS
8. Enter/Exit Configuration Mode
п.6, п.7. – для устройств работающих с сигналами RTS/CTS (АМС100К,РШК5М…)
подключение к ККМ (AMC100K) через переходник DB9M-DB9F (2-2,5-5,7-7,8-
